Toolbox Nmea Output

How to Enable NMEA Output for a Third-Party Device

1. Open Toolbox.

2. Go to the NMEA Output tab.

3. Take the required connection parameters from the third-party device (for example: baud rate and supported NMEA messages).

4. Fill in the fields in the NMEA Output settings:

   • Baud rate

   • GGA

   • RMC

   • VTG

   • GST

   • ZDA

   • GSA

   • GSV

5. After all parameters are configured, turn on the NMEA Output switch.

6. The device will start sending NMEA data to the external device.