Mount the Tablet Holder

Fix the holder ball to a metal plate.

In the package

• The holder ball
• 4 Phillips screws

Required tools

• An iron angle
• Screws (to fix the iron angle)
• A Phillips screwdriver
• A pen marker

How to mount it?

1. Carefully consider where you want to mount the Tablet Holder.
2. You must place it in a position where it will be easy to use while operating the tractor.
3. Find an angle iron that you can fix in the cabin so you can easily reach it from the seat.
4. Consider drilling a hole and screwing the angle iron to the cabin, as shown in illustration (1).
5. If the iron angle has no screw holes, you need to drill them. Place the holder ball on the iron angle. Put a mark inside the screw holes of the holder ball so that you will know where to drill the holes.
6. When you screw the holes, place at least 2 screws on the opposite sides of the holder ball and use the screwdriver to fix them firmly to the iron angle.

You can horizontally scroll the table on mobile.

You can horizontally scroll the table on mobile.