Connect the Steering Controller with the Cable

How to connect it?

1. Locate the cable and the plug to be inserted to the Steering Controller.
   
2. You can recognise it by 10 sockets: 8 placed around the edges and 2 placed in the middle.
   
3. Check if the cable label has the following information: “A” Illustration (3) presents the cable and the plug.
   
4. Illustration (3) presents the cable and the plug.
5. Locate the Steering Controller socket, which should be oriented towards the cabin.
   
6. Illustration (1) presents the Steering Controller socket.
   
7. Take the cable with the plug and orient it so that the 2 middle sockets are in a horizontal position.
   
8. Insert the plug into the Steering Controller socket and push firmly. Ensure the plug is securely fixed in the socket.
   
9. Screw the nut rightwards with your hand until the resistance is strong enough to prevent further screwing. Hold the Steering Controller with your other hand to ensure the mounted station stays still.
   
10. Check whether you can to reach the cabin with the cable and the plug.
    
11. If there is no comfortable way to pass the cable to the cabin, consider drilling a hole through which the cable may be passed.
    

You can horizontally scroll the table on mobile.

You can horizontally scroll the table on mobile.