Anti-rotation bracket -01

Anti-rotation bracket -01

Assemble the Motor and the Anti-rotation Bracket (-01)

---

In the package:

• 1 pipe clamp
  
• 1 L-shape metal corner
  
• 2 hex nuts M8 (for open-end wrench size 13mm)
  
• 2 plain washers
  
• 2 toothed lock washers
  
• 2 hex nuts with extended edges
  
• 2 screws M5 with plain washers and spring lock washers (for open-end wrench 8mm)
  
• C-shaped metal pipe with a thread
  
• Metal stabilizer
  
• The Motor
  

Required tools

• Open-end wrench size 13
  

• Open wrench size 8

Information
In the case of the Anti-rotation bracket -01 the steps of assembling the equipment and mounting it to the steering shaft have been covered together.

Anti-rotation bracket -01

How to mount it?

1. Take the C-shaped metal pipe with a thread and shovel it on the steering shaft rod around 5 centimeters below the end of the steering shaft.
   

2. Place the metal stabilizer on the two ends of the C-shaped metal pipe with a thread.
   

3. Place the 2 hex nuts with extended edges on the two ends of the C-shaped metal pipe with a thread.
   
4. Place the 2 plain washers with extended edges on the two ends of the C-shaped metal pipe with a thread.
   
5. Shovel the L-shaped metal corner on the two ends of the C-shaped metal pipe with a thread so that the longer end is in a vertical position.
   
6. Place the 2 toothed lock washers on the two ends of the C-shaped metal pipe with a thread.
   
7. Place the 2 hex nuts M8 washers on the two ends of the C-shaped metal pipe with a thread.
   
8. Use the open-end wrench size 13 to screw the hex nuts to the L-shaped metal corner securely.
   
9. Place the Motor on the steering shaft.
   
10. Move the L-shaped metal corner up so that it touches the bottom of the Motor.
    
11. Move the Motor so that the screw holes are directly in line with the channels of the L-shaped metal corner.
    
12. Place the 2 screws M5 with plain washers and spring lock washers in the screw holes on the bottom of the Motor.
    
13. Use the open wrench size 8 to screw the screws firmly.
    

Required tools

• Open-end wrench size 17
  

• Open-end wrench size 13
  

• Open wrench size 8

You can horizontally scroll the table on mobile.