|
Important!
It's crucial to maintain a minimum distance of 80 cm between the center of the controller and the center of the rear axle when installing it on the roof.
---
It is very important for the Steering Controller to be placed in the middle of the tractor roof to ensure the accuracy of the navigation.
---
Required tools
- Tape-measure
- Marker pen
-
A ladder
How to do it?
- Take a ladder and position it next to the tractor
so that you can easily access the roof.
- Check the length of the tractor roof using a tape measure.
- Use a marker pen to mark a spot in the middle of the length of the roof.
- Check the width of the tractor roof in a place where you marked a spot.
- Use a marker pen to mark a spot in the middle of the width of the roof.
- This way, you can find the most suitable
position for the Steering Controller.
|
You can horizontally scroll the table on mobile.
|
|
Important!
It's crucial to maintain a minimum distance of 80 cm between the center of the controller and the center of the rear axle when installing it on the roof.
---
Mount the plastic plate on the roof
- Take a ladder and position it next to the tractor so you can easily access the roof.
- Spray the degreaser on the roof in the area surrounding the mark and wipe it until the surface is dry.
- Check with a level whether the position you have market on the roof is ideally flat.
- Cut 6-8 centimeters long pieces of tape, uncover one side of the tape and stick it to the roof so that the shape of the sticked tape is rectangular.
- If the roof has any uplifts in the centre or any other anomaly in its flatness, use the double-side tape to level the space up.
- Stick the double-side tape in the places where there is any anomaly in flatness.
- Repeat the above step as many times as necessary, each time checking with the level whether the position is ideally flat.
- Take the Plastic Plate and turn it around so that the side with the tape faces the bottom.
- Try the Plastic Plate on the roof, ensuring that the element standing out from the circular shape ideally faces the back of the tractor.
- Firmly press the Plastic Plate to the roof.
- Lightly hit the Plastic Plate with your feast on the edges to ensure that it sticks firmly to the roof.
|
|
