Montaggio della flangia sul cofano

È molto importante che il controller di guida sia posizionato al centro tra le ruote anteriori per garantire la precisione della navigazione.

Strumenti necessari

• Metro di misura a nastro
• Pennarello

How to do it?

1. Check the width of the tractor bonnet between the center of the front wheels.
2. Use a marker pen to mark a spot in the center of the front wheels.
3. In this way, you can find the most suitable position for the Steering Controller.
   

Sui dispositivi mobili è possibile scorrere orizzontalmente la tabella.

Mount the plastic plate on the bonnet

1. Spray the degreaser on the bonnet in the area surrounding the mark and wipe it until the surface is dry.
2. Check with a level whether the position that you have marked on the bonnet is ideally flat.
3. If the bonnet has any uplift in the center or any other anomaly in its flatness, use the double-sided tape to level the space up.
4. Cut 5-8 centimeters long pieces of tape, uncover one side of the tape and stick it to the bonnet.
5. Repeat the above steps as many times as necessary, each time checking with the level whether the position is ideally flat.
6. Grab the Plastic Plate and turn it around so that the side with the tape is facing the bottom.
7. Try the Plastic Plate on the bonnet, ensuring that it is located with the Front side mark towards the direction of the tractor.
8. Firmly press the Plastic Plate to the bonnet.
9. Lightly hit the Plastic Plate with your feast on the edges to ensure that it sticks firmly to the bonnet.

You can horizontally scroll the table on mobile.