Safety instructions

Introductory remarks

To understand the potential hazards associated with the operation of the PowerSteer equipped vehicle, read carefully the provided documentation prior to installing or operating the Power Steer system on a vehicle. Please bear in mind that the safety instructions are for reference only and do not cover all possible hazardous and dangerous conditions.

FieldBee has made all possible efforts to ensure the reliability of the information contained in this instruction. However, errors and omissions may be possible. Therefore, the instruction is for reference only and does not constitute any express or implied warranty. 

The FieldBee Power Steer system installer and manufacturer disclaim any responsibility for damage or physical harm caused by failure to adhere to the following safety requirements.

As the operator of the vehicle, you are responsible for its safe operation. The FieldBee Power Steer system is not designed to replace the vehicle’s operator.

You can horizontally scroll the table on mobile.

NOTE:
Prior to operating the PowerSteer Manual Guidance system, verify that all the screws, bolts, nuts, and cable connections are tight and that all the cables and hoses have been secured to prevent them from being damaged. Verify there are no oil leaks in the steering circuit.

WARNING

The Autosteer system installer and manufacturer disclaim any responsibility for damage or physical

harm caused by failure to adhere to the following safety requirements:

As the operator of the vehicle, you are responsible for its safe operation. The Autosteer system is

not designed to replace the vehicle’s operator.

To understand the potential hazards associated with the operation of an Autosteer equipped vehicle, read the provided documentation prior to installing or operating the Autosteer system on a vehicle.

To prevent accidental death or injury from being run over by the vehicle, never leave the vehicle’s operator seat with the Autosteer system engaged.

To prevent accidental death or injury from being run over by the vehicle, verify that area around the vehicle is clear of people and obstacles before startup, calibration, tuning, or use of the Autosteer system.

To prevent the accidental engagement of the Autosteer system and loss of vehicle control, power down the Autosteer system while driving on roads. Never drive on roads or in public areas with the Autosteer system powered up.

Verify that you are in a stable position on the vehicle’s platform or stairs when installing or removing the antenna assembly on top of the cab, so you do not fall. If the vehicle does not provide a safe platform, use a ladder to safely access the vehicle’s roof.

To avoid electrical shock hazards, remove the antennas from the vehicle before driving under low structures or low electrical power lines.

If the installation requires working on the hydraulic system on the vehicle, read and understand the hydraulic sections of the vehicle manufacturer’s operators manual before starting the installation Wear hand and eye protection while performing hydraulic system maintenance. Relieve hydraulic system pressure before servicing the hydraulic system.

CAUTION

The Autosteer system does not detect obstacles in the vehicle’s path. The vehicle operator must observe the path being driven and take over steering manually if an obstacle must be avoided.

The Autosteer system does not control the speed of the vehicle. The operator must manually adjust the speed of the vehicle to keep the vehicle safely under control.

The Autosteer system must be powered OFF when installing or removing the Autosteer, or any other components connected to the Autosteer system.

Installation Safety Measures

The Power Steer system must be powered OFF when installing or removing the Power Steer, or any other components connected to the Power Steer system.

Verify that you are in a stable position when installing or removing the Steering Controller on the roof so you do not fall down. If the vehicle does not provide a safe platform, use a ladder to safely access the vehicle’s roof.

To prevent accidental death or injury from being run over by the vehicle, verify that area around the vehicle is clear of people and obstacles before installation, calibration, tuning, or use of the PowerSteer system.

Keep the equipment away from high-power wireless equipment such as wireless transmitters, radar transmitters, high frequency and current devices, and microwaves.

Do not install the product in an environment with high temperature, heavy dust, harmful gas, flammable substances, explosive substances, electromagnetic interference (large radar station, transmitter station, substation), unstable voltage, high vibration, or loud noise; otherwise, the equipment may be unable to operate normally.

Do not install the equipment in places vulnerable to water accumulation, water seepage, water dripping, condensation, etc., so as to prevent the equipment from being damaged by water accumulated at the interface.

If the equipment is operated in an environment with high relative humidity, insulation materials may be degraded to cause electric leakage; the mechanical properties of materials may be changed and metal parts may become rusty.

After the equipment has been installed, do not remove it frequently as this may lead to unexpected damage.

When connecting the power cable to the battery, connect the terminals of the power line to the positive and negative terminals of the battery accordingly.

Operation Safety

To prevent accidental death or injury from being run over by the vehicle, never leave the vehicle’s operator seat with the Power Steer system engaged.

To prevent the accidental engagement of the Power Wheel system and loss of vehicle control, power OFF the Power Steer system while driving on roads. Never drive on roads or in public areas with the Power Steer system powered up.

The Power Steer system does not detect obstacles in the vehicle’s path. The vehicle operator must observe the path being driven and take over steering manually if an obstacle must be avoided.

The Power Steer system does not control the speed of the vehicle. The operator must manually adjust the speed of the vehicle to keep the vehicle safely under control.

You can horizontally scroll the table on mobile.