|
Important
Once placed, the main and secondary devices should always be on the same Plastic plates/places on the roof. User cannot change the position for these devices.
How to connect it?
- Connect the main harness and the extra harness for Dual. Take a controller connector with 10 pins from harness and connect to plastic case of extensional cable. Please check scheme of connetcion, shown on picture (4).
- Locate the cable and the plug to be inserted to the Steering Controller.
- You can recognise it by 10 sockets: 8 placed around the edges and 2 placed in the middle.
- Check if the cable label has the same mark as the Controller.
- Illustration (3) presents the cable and the plug.
- Locate the Steering Controller socket, which should be oriented towards the cabin.
- Illustration (1) presents the Steering Controller socket.
- Take the cable with the plug and orient it so that the 2 middle sockets are in a horizontal position.
- Insert the plug into the Steering Controller socket and push firmly. Ensure the plug is securely fixed in the socket.
- Screw the nut rightwards with your hand until the resistance is strong enough to prevent further screwing. Hold the Steering Controller with your other hand to ensure the mounted station stays still. Repeat this iteration for the second Controller.
- Check whether you can reach the cabin with the cable and the plug.
- If there is no comfortable way to pass the cable to the cabin, consider drilling a hole through which the cable may be passed.
|
You can horizontally scroll the table on mobile.
|
