Search Results

The FieldBee base station can work in different correction data output modes — one of them is NTRIP. NTRIP is a protocol that streams RTK correction data over the internet instead of radio. This allows you to use RTK corrections even outside the range of loca...

Connecting to the receiver. For general information about connecting receivers and autosteer controllers, please refer to the"Connecting to the receiver and autosteer basics" section. Information!Further in this section, only the connection steps specific to...

Connecting to the autosteer. For general information about connecting receivers and autosteer controllers, please refer to the"Connecting to the receiver and autosteer basics" section. Information!Further in this section, only the connection steps specific t...

ECU-S1 Autosteer. Search and Establish a Connection After selecting your connection type, proceed to the connection screen: In case if the cable connection type, (Ethernet conenction between application and Autosteer) was selected, the App initiates a sc...

Autosteer parameters Default autosteer parameters should perform adequately for most normal field operations. However, in some situations, it may be necessary to adjust the steering performance to consider field conditions, implement selection, traveling spee...

Map menu To open the map menu select  on the top panel and choose one of the offered options: In the map menu you can: Switch map layers between: Normal, Hybrid, Satelite.  Switch between 2D and 3D map view by pressing on  . Switch dis...

Ruler path Ruler path measures the distance between objects (or points) on the map. To use it follow these steps: On the top panel, press Ruler icon and select “Ruler path”; Set the points between which you want to measure the distance, by simply t...

Track parameters Before recording the track, you should configure the track parameters. Tap to Create a Track. To begin, input the necessary information into each of the designated widgets: Select the TASK you wish to perform, specify the relevant FIELD, c...

Overview The machine operator in navigation mode gets the map of a field with the lines for navigation. He can see when the machine is off the line, which allows the processing of the field with minimal overlaps and misses. Satellite map and field map allow f...

Tractor guidance After you have: Successfully connected to the Receiver or Autosteer. Set up RTK connection. Selected desired Track Parameters. You are ready to start your first track and proceed to the tractor guidance. Tap on the  button to start dr...

Shift guidance lines Using navigation patterns you can build the navigation line (base line) for the field by setting the A and B points, see section Tractor guidance for more information. All navigation lines on the field are built automatically basing on th...

Sound and voice notifications You can turn off/on Sound and Voice notifications. For that, you need to Pause the track and tap icon on the top panel. Deviation sound appears, when your deviation from the current path is in the red zo...

GPS Settings You can adjust GPS Settings in the Navigation. For that, you need to Pause the track and tap icon on the top panel. Menu with GPS Settings will be opened. Navigation tolerance - an acceptable deviation from the guidelin...

Patterns AB-Straight and AB-Curve Start driving (AB Straight or AB Curve pattern): Set A-point at the beginning of the first pass. Set B-point at the end of the first pass. The App will build an initial guideline between the...

Patterns AB-Manual To set a straight AB line with an AB Manual pattern, driving is not necessary. Zoom out or move the map to find the required place and tap on it to set the Start point of the first pass. Tap on the map to set the End point of the first ...

Patterns Headland If you select the HEADLAND pattern (Headland Straight, Headland Curve), you can record one or more field circuits One Perimeter headland. At the beginning of a perimeter, tap the SET button. Then set points A and B for the fir...

Pattern Multiple Headland Multiple Headland is a modified Headland pattern, application draws guidance lines along the field border automatically.You can use these circles for more precise agriculture. It is also possible to reselect the inner pattern (AB Str...

Pattern Saved track Your tracks, from the previous operations related to the fields, are saved and can be used as a pattern for further guidance. WarningFor Saved track pattern, the field is required. To use the Saved track pattern: Tap Add track. Selec...

Pattern Guidance lines Guidance lines provide the list of the patterns used earlier on the field. Guidance lines are the saved 0 guideline and related to the field. Guidance lines will be available for different tasks with the field they belong to. Informati...