FR PowerGuide installation manual
Installation Overview
Introduction
Guide du manuel FieldBee PowerSteer est un système de guidage de tracteur ultramod...
Consignes de sécurité
Remarques introductives Pour comprendre les risques potentiels associés à l'utilis...
Soutien
Soutien L'équipe FieldBee est heureuse d'aider les agriculteurs à répondre à toute...
À l'intérieur de la boîte
InformationVérifiez si le colis que vous avez reçu contient les éléments suivants. ...
Optional equipment
You get these items if you ordered them as an additon to the basic equipment. Powe...
Pre-requisites for installation
You get these items if you ordered them as an additon to the basic equipment. SI...
Overview of the installation steps
This Installation Overview chapter contains a general description of each step of the i...
Steering Controller Installation
Technical specification
Accuracy and operating speed 2,5cm accuracy with RTK correction signal. Minimum a...
Define the Steering Controller position
InformationThere are two places where you can mount the Steering Controller. It can eit...
Prepare the plastic plate
Warning: It is very important for the Plastic Plate to be mounted on an ideally flat po...
Mount the plastic plate on the bonnet
It is very important for the Steering Controller to be placed in the middle between the...
Install steering controller on the bonnet
In the package Steering Controller How to do it? Grab the Steering Controlle...
Mount the plastic plate on the roof
Important! It's crucial to maintain a minimum distance of 80 cm between the center of ...
Install the steering controller on the Plastic Plate on the roof
In the package Steering Controller How to do it? Take the Steering Controlle...
PowerTablet installation
Technical specification
Power Tablet CPU - Qualcomm Cortex-A53 64-bit Octa-core Processor, 1.8GHz GPU -...
Mount the Tablet Holder
Fix the holder ball to a metal plate. In the package The holder ball 4 Phillips sc...
Fix the handle to the handle ball
In the package Tablet handle How to do it? Turn the handwheel several ti...
Mount the PowerTablet holder to the handle
In the package Tablet holder Handle ball 4 machine screws 4 nylock nuts ...
Fix the PowerTablet holder to the handle
In the package Tablet handle PowerTablet holder How to do it? Turn the hand...
Install SIM Card to PowerTablet
For the tablet to start operating correctly, you need to insert a SIM card with an acti...
Install Battery to PowerTablet
How to do it? Place the battery back in its previous position. Slide the switcher...
Mount the PowerTablet in the Tablet Holder
How to do it? Grab the PowerTablet and place its bottom part in the Holder. Grab ...
Base Station installation
Cable installation
Cable installation overview
InformationBefore you begin the installation of the Cable, get yourself familiar with t...
Connect with the Cable
InformationBefore you begin the installation of the Cable, get yourself familiar with t...
Connect the Steering Controller with the Cable
How to connect it? Locate the cable and the plug to be inserted to the Steering Co...
Connect the Cable with the cigarette lighter socket
How to connect it? Locate the cable and the plug to be inserted to the cigarette l...
Connect the PowerTablet with the Cable
In the package PowerTablet The AT06-2S-KIT01 connector Charger with Female USB T...
Turn on the power supply
Turn on the power supply Having connected all equipment parts with the Cable, chec...