EN PowerSteer Dual installation manual
Installation Overview
Introduction
The FieldBee PowerSteer is an affordable retrofit RTK autosteer system that allows y...
Safety instructions
Introductory remarks To understand the potential hazards associated with the operati...
Connection Diagram
Connection Diagram Internet Connection (1)Wireless mobile internet connection. Conn...
Support
Support The FieldBee Team is happy to help farmers with any questions they may have ...
Inside the Box
InformationCheck whether the package you have received contains the following items. ...
Optional equipment
You get these items if you ordered them as an additon to the basic equipment. Pow...
Pre-requisites for installation
You get these items if you ordered them as an additon to the basic equipment. S...
Overview of the installation steps
This Installation Overview chapter contains a general description of each step of the i...
Power Wheel Installation
Technical specification
Specification DC working power +7V~32VDC Continuous current 10A, maximum peak cur...
Mount the Motor and the Wheel Adapter
Required items The Wheel Adapter The Motor A Hex Key size 4 6 hex screws 6 ...
Assemble the Motor and the Anti-rotation Bracket - overview
You have received one of the three possible Anti-rotation brackets depending on your st...
Assemble the Motor and the Anti-rotation Bracket
You have received one of the three possible Anti-rotation brackets depending on your st...
Anti-rotation bracket -01
Anti-rotation bracket -01 Assemble the Motor and the Anti-rotation Bracket (-01) --- ...
Anti-rotation bracket -02
Anti-rotation bracket -02 Assemble the Motor and the Anti-rotation Bracket (-02) --...
Anti-rotation bracket -03
Anti-rotation bracket -03 Assemble the Motor and the Anti-rotation Bracket (-03) --...
Mount the Motor to the steering shaft
Anti-rotation bracket -02 Mount the Motor to the steering shaft --- Required tools...
Mount the PowerWheel
In the package PowerWheel 4 plain washers 4 hex screws Required tools A He...
Mount the PowerWheel cap
In the package PowerWheel cap How to mount it? Place the cap in the central so...
Fix the Anti-rotation bracket -02
Anti-rotation bracket -02 Fix the Anti-rotation bracket -02 --- Required tools ...
Fix the Anti-rotation bracket -03
Anti-rotation bracket -03 Fix the Anti-rotation bracket -03 --- WarningIt is very im...
FieldBee PowerSteer Dual installation
Technical specification
Accuracy and operating speed ± 2,5cm accuracy with RTK correction signal Minimum ...
Steering controllers installation diagram
WarningIt is very important for the Main and Secondary controllers to be placed on the ...
Prepare the plastic plate
Warning: It is very important for the Plastic Plate to be mounted on an ideally flat po...
Mount the plastic plate on the roof
It is very important for the Steering Controller to be placed in the middle of the trac...
Install the main and secondary steering controllers on the plastic plate
ImportantThe Main Controller should be placed on the left side of the roof. In the pac...
PowerTablet installation
Technical specification
Power Tablet CPU - Qualcomm Cortex-A53 64-bit Octa-core Processor, 1.8GHz GPU -...
Mount the Tablet Holder
Fix the holder ball to a metal plate. In the package The holder ball 4 Phillips sc...
Fix the handle to the handle ball
In the package Tablet handle How to do it? Turn the handwheel several ti...
Mount the PowerTablet holder to the handle
In the package Tablet holder Handle ball 4 machine screws 4 nylock nuts ...
Fix the PowerTablet holder to the handle
In the package Tablet handle PowerTablet holder How to do it? Turn the hand...
Install SIM Card to PowerTablet
For the tablet to start operating correctly, you need to insert a SIM card with an acti...
Install Battery to PowerTablet
How to do it? Place the battery back in its previous position. Slide the switcher...
Mount the PowerTablet in the Tablet Holder
How to do it? Grab the PowerTablet and place its bottom part in the Holder. Grab ...
Base Station installation
WiFi Router installation
Main harness installation
Main harness installation overview
InformationBefore you begin the installation of the Main Harness, get yourself familiar...
Diagrams
Main Harness For PowerSteer and Router You can horizontally scroll the tab...
Connect to the Battery
How to connect it? Locate the cable with plugs that are to be inserted to the batt...
Connect the main and secondary steering controllers with the main harness
How to connect it? Connect the main harness and the extra harness for Dual. Take a...
Connect the motor with the main harness
How to connect it? Locate the cable and the plug that is to be inserted to the Pow...
Connect the power switch with the main harness
If it’s not connected out of the box, please follow the steps: Locate the cable an...
Fix the power switch to the steering dashboard
Required tools Tape How to do it? Consider a position for mounting the Power...
Connect the PowerTablet with the main harness
In the package PowerTablet The AT06-2S-KIT01 connector Charger with Female USB T...
Connect the Wi-Fi Router with the Main Harness
How to connect it? Locate the cable and the plug that will be inserted into the Wi...
Turn on the power supply
Turn on the power supply Having connected all equipment parts with the main harnes...