Tilt calibration (from 10.7)

Calibrations: Tilt

To ensure precise navigation with PowerGuide, you must calibrate your vehicle with the profile.

• Tilt Calibration (required) ensures the accuracy of the steering system by compensating for any inclination of the controller due to uneven terrain. Without proper calibration, the system may misinterpret the vehicle’s orientation, leading to inaccurate steering adjustments.

Tilt Calibration

Tilt calibration ensures accurate steering by compensating for any tilt in the controller. To perform the calibration, you will need approximately two minutes and a flat surface. Follow these steps:

1. Mark the initial position of the wheels.
2. Park the tractor on a flat surface and remain stationary for 15 seconds to allow the system to record the tilt data.
3. Turn the tractor 180 degrees.
4. Stop on the same flat surface and remain stationary for another 15 seconds to complete the calibration.

This process helps the system correct any tilt-related errors, improving steering accuracy on uneven terrain.