Skip to main content

Steering Enable/Disable.

Before starting Steering, ensure all track parameters are set up:

  1. Select a field
  2. Choose an implement
  3. Set the navigation pattern

Once ready, press Start Navigation and create AB lines. When the navigation lines are generated, the Steering button will appear, allowing you to activate steering.

Autosteer Control

Autosteer Engage. 

  • Status: Autosteer is currently DISABLED.
  • Action: Tap this button to ENABLE Autosteer.
  • Result: The system will begin following the guidance line, automatically steering the vehicle forward.

Autosteer Disengage.

  • Status: Autosteer is currently ENABLED.
  • Action: Tap this button to DISABLE Autosteer.
  • Result: The system will stop following the guidance line, and manual steering will be required.

🚨 You can also disable Autosteer by manually turning the steering wheel. Once turned, manual driving must continue.

Autosteer Error.

  • Status: A Steering Interruption has occurred.
  • Action: Check for possible issues and follow troubleshooting steps if needed.

Steering Adjust.

The Steering Adjust feature allows the operator to fine-tune steering performance based on changing conditions. Use the slider bar to modify the response of selected parameters.
Version Action Editor Comments
v4. 18032025 updated Yevheniia Bohatyrova
No Comments
Back to top