Skip to main content

Steering Enable / Disable

Steering Enable / Disable

To control steering you can use the following controls on the Navigation screen while driving:

Autosteer Engage. 

It means that Autosteer is DISABLED now.

Tap this button to ENABLE Autosteer. After tapping this button, Autosteer starts following the guiding line and drives forward automatically.

Autosteer Disengage.

It means that Autosteer is ENABLED now.

Tap this button to DISABLE autosteer. After tapping this button, Autosteer stops following the guiding line, and the driver needs to take the driving wheel under his own control.

*To disable Autosteer, it is enough to turn a driving wheel. After turning the driving wheel, driving must be executed manually.

Autosteer Error.
It means that Autosteer has Steering Interruption now

Steering Adjust.

The Steering Adjust enables the operator to adjust the vehicle steering performance to match these changing conditions. You can change the response of the selected item by using the slider bar.
To  Enable / Disable steering:

  1. Tap  button on Navigation to Start a new Track or Tap - to continue the previous track from Recent Tracklist.

  2. Fill in Track parameters.

  3. Start driving.

  4. Create AB line by tapping button A at the first pass start and B at the end for building the guidelines.

  5. Tap to START STEERING.

  6. To DISABLE steering:

    • Tap  button.

    • Or turn the steering wheel to interrupt steering manually.

No Comments
Back to top