Starting and Synchronizing Tasks (10.9.x)

Before you begin field operations, ensure both systems are properly configured and synchronized to enable precise implement control. 

 1. Pre-Operation Checklist 

 Before starting the Jaltest app, you must complete these preparation steps in the FieldBee application: 

 

 

 Add Vehicle Parameters: 

 

 

 Measure and enter the distance from the rear axle to the 3-point hitch . 

 

 

 Measure and enter the distance from the rear axle to the drawbar or towed hitch . 

 

 

 

 

 Field Setup: Ensure you have already created the field where you intend to work. 

 

 

 

 2. Creating a New Task 

 Once your vehicle parameters are set and Jaltest communication is enabled, follow these steps to start a task: 

 

 

 Open Navigation: In the FieldBee app, tap the Add (+) button to create a new task. 

 

 

 Select Task Type: Choose your operation (e.g., Tilling, Spraying, Fertilizing, or Planting). 

 

 

 Select Field and Vehicle: 

 

 

 Choose the required Field for the operation. 

 

 

 Choose the Vehicle profile (e.g., Case 5130) previously configured. 

 

 

 

 

 3. Synchronizing Data with Jaltest 

 When both the field and vehicle are selected, the synchronization option becomes available: 

 

 

 Share Data: Tap the SHARE DATA button in the Jaltest ITC status box. 

 

 

 Automatic Implementation: After synchronization: 

 

 

 The corresponding ISOBUS implement (e.g., SPRAYER - Cojali S.L.) is automatically created in the FieldBee app. 

 

 

 The corresponding operation is simultaneously created within the Jaltest app. 

 

 

 

 

 4. Navigation 

 

 

 Tap the Start (Yellow Arrow) button in FieldBee to begin navigation. 

 

 

 Active Tracking: Once started, track recording begins simultaneously in both applications , allowing you to monitor navigation in FieldBee while managing implement data in Jaltest.