Starting and Synchronizing Tasks (10.9.x)

Before you begin field operations, ensure both systems are properly configured and synchronized to enable precise implement control.

1. Pre-Operation Checklist

Before starting the Jaltest app, you must complete these preparation steps in the FieldBee application:

• Add Vehicle Parameters:

  • Measure and enter the distance from the rear axle to the 3-point hitch.

  • Measure and enter the distance from the rear axle to the drawbar or towed hitch.

• Field Setup: Ensure you have already created the field where you intend to work.

2. Creating a New Task

Once your vehicle parameters are set and Jaltest communication is enabled, follow these steps to start a task:

1. Open Navigation: In the FieldBee app, tap the Add (+) button to create a new task.

2. Select Task Type: Choose your operation (e.g., Tilling, Spraying, Fertilizing, or Planting).

3. Select Field and Vehicle:

   • Choose the required Field for the operation.

   • Choose the Vehicle profile (e.g., Case 5130) previously configured.

3. Synchronizing Data with Jaltest

When both the field and vehicle are selected, the synchronization option becomes available:

1. Share Data: Tap the SHARE DATA button in the Jaltest ITC status box.

2. Automatic Implementation: After synchronization:

   • The corresponding ISOBUS implement (e.g., SPRAYER - Cojali S.L.) is automatically created in the FieldBee app.

   • The corresponding operation is simultaneously created within the Jaltest app.

4. Navigation

1. Tap the Start (Yellow Arrow) button in FieldBee to begin navigation.

2. Active Tracking: Once started, track recording begins simultaneously in both applications, allowing you to monitor navigation in FieldBee while managing implement data in Jaltest.