Patterns AB-Straight and AB-Curve

Patterns AB-Straight and AB-Curve

Start driving (AB Straight or AB Curve pattern):

1. Set A-point at the beginning of the first pass.

2. Set B-point at the end of the first pass.

The App will build an initial guideline between these points and display parallel guidelines for the whole field (if a field is added to the task).

No field. AB-Straight. Dynamic Route.

• When you use Straight Line without selecting a field first, the system will help you by automatically building routes based on your A-B line.

  ✅ What happens after you set Point A and Point B:

  • The system creates a main route between A and B. This is called the "0 Route".

  • Then it builds 10 extra routes on the left and 10 on the right of this line — so you get a total of 21 straight routes to start with.

  • The system also adds 200 meters of extra length at both ends of the A-B line. This gives you more room for smooth turns or overlaps.

  🚜 While you're working:

  • If you reach the end of any route, the system will automatically add 200 meters in that direction. This helps you cover the full area without stopping (from the app version 10.6.7).

  • If you navigate to the last available route, the system will add 10 more routes beyond it — no need to do it manually! (from the app vesrion: 10.6.7).

Lightbar on the top shows a deviation from the optimal route. It also shows how far you deviate from the route. 

After the AB line was built, the route was marked as 0. On the left side, routes are marked 1,2,3,... At the right side, routes are marked -1,-2,-3,... 

Information
For numbering routes, you need to specify a field.

🗑️ Deleting Current Pass Guides

If you want to remove the current guidance lines and start fresh, follow these steps:

1. Tap the Pattern Selection button
   – This opens the list of available driving patterns.

2. Choose the pattern you want to use again or switch to a new one.

3. Tap “DELETE GUIDES”
   – This will remove all the current pass guides from the screen.

Now you're ready to create a new route or apply a different pattern.

Current routes are deleted and now you can create a new AB line.

When you finish your work, tap  button to pause track recording and then tap button to Save your track.

To use the AB Curve pattern - follow the same steps as for AB Straight pattern.

No field. AB-Curve. Dynamic Route.

When using Curve Line  without selecting a field first, the system creates routes based on the first curved pass you make.

✅ After you record your first curved route:

• The system saves it as the “0 Route” – your base curved line.

• Then, it automatically generates 10 curved routes to the left and 10 to the right, based on the shape of the 0 Route.

• You also get 200 meters of extra length added to both ends of the curved line for smoother entry and exit.

• If you navigate to the last available route, the system will add 10 more routes beyond it — no need to do it manually! (from the app version 10.6.7)

In Curve, if you navigate to the end of a curved route, the system does NOT automatically extend the line.