Pattern Multiple Headland

Pattern Multiple Headland

Multiple Headland is a modified Headland pattern, application draws guidance lines along the field border automatically.
You can use these circles for more precise agriculture. It is also possible to reselect the inner pattern (AB Straight, AB Curve, AB Manual) and save recorded track circles.

Warning
For Multiple Headland pattern, the field is required.

To use the Multiple Headland pattern:

1. Tap Add track.
2. Select the field.
3. Tap Patterns and select Multiple Headland.
4. Multiple Headland parameters dialog is opened:
   • Set number of circles
   • Select inner pattern
   • Tap Save
     
     
5. Multiple Headland with parameters are set as the pattern.
6. Tap Start.
7. Multiple circles are built according to the field geometry, machinery width and offset.
8. Record circles;
9. Tap  to switch to inner pattern (AB Straight, AB Curve, AB Manual)
10. Set A-point  at the beginning of the first pass, then set B-point at the end of the pass. Parallel guidelines are built in the inner circle.
11. For switching to circle guidelines tap .

If you want to change the inner pattern, when start record a track with Multiple Headland:

1. Tap  to switch to inner pattern (AB Straight, AB Curve, AB Manual)

2. Then tap Pattern name: Multiple Headland at the bottom bar.

3. Select pattern screen is opened.
   

4. Re-select pattern by tapping it;

5. Delete guidelines confirmation message is shown; 

6. To delete current guidelines tap DELETE GUIDES;

7. Then you can set A and B points again.