Front Implement Setup (First itaration, 10.9.x)

This guide covers how to create, configure, and navigate with a front-mounted header in the FieldBee app.

Please note that front implement functionality is currently available only for the Harvesting operation and the Header for combine harvester implement type."

Creating a Front Implement

1. Select the Implement Type:
   • Select Harvesting -> Header for combine harvester.
2. Enter Implement details.
3. Configuring Implement Parameters

   • Hitch Type: Select the appropriate connection (e.g., "Other" for headers).

   • Implement Subtype: Choose "Standard" or "Reversible."

   • Work Width: Enter the actual width of the implement (e.g., 450 cm).

   • Gap or Overlap: Specify if you want intentional overlap or an inter-row gap between passes.
     

   • Distance to Implement: In this iteration, the app may display a diagram of a rear implement. However, for this specific setup, the value you enter applies to your Front Implement.

   • Measurement: Enter the distance from the center of the controller forward to the center of the implement's work area.

   • Implement Offset: If the implement is not centered with the vehicle, enter the left or right offset.
4. Tap Save Profile and confirm