Create a new Vehicle
Create a new Vehicle
Without a connection to the controller, creating only a tractor profile is possible
Vehicle profilce can be created from the "My Equipment" section, during your equipment (PowerSteer, PowerSteerReady, PowerSteer Dual) connection process (Pic 1.). For more information refer to the Vehicle. PowerSteer profile and Calibration section.
Also new vehicles can be created directly from the "Record keeping", "Vehicles" section of the application (Pic. 2)
To create new vehicle in the "Record keeping" section "Vehicles" tap on the 
button to start vehicle creation wizard.
Vehicle creation wizard will guide you through the process of the vehicle creation and help you to make the necessary measurements correctly.
1. Select vehicle type Tractor or Combine Harvester.
2. Enter vehicle brand and model, this is mandatory fields. Optionally you can enter name (default vehicle name will be formed from brand and model), year of manufacturing and drive type (2WD or 4WD).
Follow the vehicle creation wizard hints to perform all the measurments correctly.
3. Provide the wheel base measurments (Distance beetween front wheel and back wheel centers/axle).
4. Provide the rear axle track width measurments (Distance beetween rear axle tire centers).
5. Provide the measurment from the rear axle to the rear 3-point hitch (Distance between rear axle to implement mounting point).
6. Provide the measurment from rear axle to the drawbar end or towing hitch.
7. Provide the maximum turn angle of the front wheels.
You can refer to the vehicle operation manual or your local vehicle manufacturer dealer to get your factory front wheels maximum turn angle value.
8. On the last wizard step a summary will be displayed. Check summary information carefully, edit measurments if needed.
If all measurments are correct - tap "SAVE PROFILE" button to finish implement creation and save.
No Comments