EN Navigation APP

Installing FieldBee application The FieldBee app requires an Android OS version of at least 7....

Language selection After the application has been installed, you can select the language you pre...

Registration After the language has been selected you will move to the GET STARTED page (Fig.1.2...

Sign Up with Email If you haven’t registered yet, tap "SIGN UP WITH EMAIL" to create an account ...

Sign in To log in, you have to be registered. You can sign into the app in two ways (Fig.1.2): ...

Password recovery If you don't remember the account password, tap "Forgot". Enter the email whic...

Connecting to the receiver and autosteer. For general information about connecting receivers...

The next step is to select or create a vehicle and enter the PowerSteer parameters. Then, the veh...

To ensure precise navigation with PowerSteer, you must calibrate your vehicle with the PowerSteer...

Before starting Steering, ensure all track parameters are set up: Select a field Choose an im...

Freelpay calibration determines the minimum steering angle at which the front wheels start to mov...

An Implement Impact Coefficient is a tuning parameter used to correct path-tracking errors caused...

After the vehicle has been calibrated, it should perform well for most standard field operations....

Our development team has created a new navigation algorithm (Alg v3. Motor: Position mode) that c...

After the vehicle has been calibrated, it should perform adequately for most normal field operati...

Reconnection (disconnection). The App saves the connection once you have connected to PowerSteer...

Connecting to the receiver and autosteer. For general information about connecting receivers and...

Establishing the Connection In the FieldBee App, go to My Equipment and tap Add Equipment (+...

Next step of connection is create or select SteerReady tractor. 1. To create a new one, click AD...

Go to My equipment and quickly checking and ensuring the system is ready for Autosteering: C...

Connecting to the receiver and autosteer. For general information about connecting receivers and...

Connecting to the receiver. For general information about connecting receivers and autosteer con...

Vehicle profile & PowerGuide profile The next step is to select or create a vehicle and enter yo...

Calibrations: Tilt To ensure precise navigation with PowerGuide, you must calibrate your vehic...

RTK Setup. After ensuring that your internet connection is properly established and the receiver...

Local NTRIP provider. Local NTRIP providers are organizations that operate RTK correction servic...

The FieldBee base station can work in different correction data output modes — one of them is NTR...

The FieldBee base station can work in different correction data output modes — one of them is Rad...

Connecting to the receiver. For general information about connecting receivers and autosteer con...

Connecting to the autosteer. For general information about connecting receivers and autosteer co...

ECU-S1 Autosteer. Search and Establish a Connection After selecting your connection type, procee...

Autosteer parameters Default autosteer parameters should perform adequately for most normal fiel...

Steering Enable / Disable To control steering you can use the following controls on the Navigati...

Navigation overview On the Navigation screen, you can: ● Configure the settings of a track;● Re...

Controls To use the map successfully FieldBee has the following controls:      ...

GPS Source To increase the accuracy of recording tracks, you can connect Fieldbee equipment or e...

Map menu To open the map menu select  on the top panel and choose one of the offered options: ...

Ruler path Ruler path measures the distance between objects (or points) on the map. To use it fo...

Track parameters Before recording the track, you should configure the track parameters. Tap to...

Sound and voice notifications You can turn off/on Sound and Voice notifications. For that, you n...

GPS Settings You can adjust GPS Settings in the Navigation. For that, you need to Pause the trac...

Introduction The "Section Control" feature in the FieldBee Navigation app provides convenient ...

Overview The machine operator in navigation mode gets the map of a field with the lines for navi...

Tractor guidance After you have: Successfully connected to the Receiver or Autosteer. Set up...

Shift guidance lines Using navigation patterns you can build the navigation line (base line) for...

Patterns AB-Straight and AB-Curve Start driving (AB Straight or AB Curve pattern): Set A-poin...

Patterns AB-Manual To set a straight AB line with an AB Manual pattern, driving is not necessary...

Patterns Headland If you select the HEADLAND pattern (Headland Straight, Headland Curve), you ca...

Pattern Multiple Headland Multiple Headland is a modified Headland pattern, application draws gu...

Pattern Saved track Your tracks, from the previous operations related to the fields, are saved a...

Pattern Guidance lines Guidance lines provide the list of the patterns used earlier on the field...

If you want to work on a field that has a headland area, you should create one from Recordkeeping...

If you want to work on a field that has a headland area, you should create one from Recordkeeping...

Tasks view To work with your Tasks, you can use two types of preview:     ...

Create a new Task To add a new Task tap the Add button in the bottom right corner and select on...

Search and filter Tasks To SEARCH tasks in the list by its name tap on the  icon in the top bar ...

Sort and delete Tasks  You can sort Tasks in the list by name, type or creation date.  Tap on ...

Fields list view To work with your Fields, you can use two types of preview: List Vie...

To create a new field, tap the button in the Recordkeeping Fields list. Select one of three diff...

To create a new field, tap the button in the Recordkeeping Fields list. Select one of three diff...

To view field details, select a field from the list and tap it, or tap on the field name in the m...

Headland areas are defined as the area at each end of the field where farm equipment turns during...

Here you can import your prescription map via ISOXML and then use it in Navigation mode. To im...

Open record Keeping-> Fields > needed Field > Guidance Lines tab. Click '+ Add new' ...

Create a new Vehicle For proper navigation with PowerSteer, PowerSteerReady, PowerSteer Dual will...

To create implement profile go to the "Recordkeeping" Select "Implements" section. In the "Im...

Reversible implements. Reversible implements functionality requires Fieldbee Premium subscriptio...

1. Creating an Implement with Sections 1.1 Adding a New Implement Navigate to RecordKeeping →...

This guide covers how to create, configure, and navigate with a front-mounted header in the Field...

This screen shows the Guidance Lines list in the FieldBee navigation application. It is used to v...

This screen shows the Line preview view in the FieldBee navigation application. It is used to rev...

User can change the AB-Straight or AB-Manual guidance line related field to use the same guidanc...

This document explains how to properly format a GeoJSON file to import Guidance Lines (AB Lines) ...

Updating your Jaltest ISOBUS software ensures you have the latest features, bug fixes, and compat...

The Jaltest ITC integration transforms your FieldBee tablet into a Universal Terminal (UT) and Ta...

Configure Split Screen  To operate your navigation and implement controls simultaneously, follow...

Before you begin field operations, ensure both systems are properly configured and synchronized t...

Before you begin field operations, ensure both systems are properly configured and synchronized t...

System settings System settings allow users to configure and customize Fieldbee application: lan...

Navigation settings The Navigation Settings allow user to fine-tune precision and automation fea...

    In the FieldBee application, you have the flexibility to define how your worked area is recor...

GPS settings The GPS settings provide you configuration options for location tracking and signal...

We have developed a new Navi Grid layout, which provides smoother graphics, faster rendering, and...

Navi Grid – Main Layout After tapping Start Navigation, the system opens the main Navi Grid layo...