Skip to main content

4. Quick start

4.1. Turn On the Device (see Turn on Receiver/Base station) 

Note: By default the Receiver/Base station is connected to WiFi network with name: rtkwifi, password: 12345678!

4.2. Create and Turn on Hotspot Wifi network with the name: rtkwifi, password: 12345678 in your phone/tablet settings. 

If this can’t be done go to “Service mode” section. 

Notes: 

- If Hotspot is not active on your smartphone please contact your mobile network provider to enable this functionality. 

- Incoming phone calls can disrupt Hotspot on you phone, if you get a lot of calls use 3G/4G WiFi Route

Install in the cabin 3G/4G WiFi Router with a sim card;

9NLcJRmQaHcnwzOcpx4yN-fzEyd9LUHnee8TUuhgin3OoV06H8LgsD-MHS17CHMrKUKUY47RBsVovMt-Ffa38uPYjjlxNJi98gbvFR6ePe0hctzAzbWxHk5imZXkiceUvOa6ibnw8wz9Id6BeZ9Sgg

4.3. Open FieldBee Toolbox Android application 

4.4. Press Allow to access your device location. (only for the first start of app) 

wHDZTtHXn48JHDV9gn4eLJm0KH1vP3bdcuDzfF_DQz88tmVF8bhBO-p8y7uVJqfk_5cygqSa-k-IaT-uDJgT-YNLPx1W4-9kbOTT2BClriA79u14Lqf__fplw2ICthQwxf5xce4zobDyqm-YOoWwyA

4.5. Select “I have L2 device” 

4.6. Select your Receiver/Base from the list of available devices 

YGZKnD3HxWgOg1Wc7XRj5JJEaP1PmGu5AqwwL0g2Od19CCujIArnT3EFWANRZ8XtVcaZUNM1328Ts_2qi-8mEBz2pw73r5ncOFlJiCLWaLgtO5m9TcQ5hrofh9r2JSzciRmDlfNFm3OHMKiIygJR1w

Note: You can see the Serial number of your L2 Receiver/Base on the sticker on the product’s box or on the bottom part of the product.

4.7. Check statuses on the Main screen.