EN FieldBee L2 RTK Receiver & Base station

1. Before use

1.1. Inside the box  - RTK GNSS L2 Receiver/Base station;  - User manual;  - Radio antenna;  ...

1.2. Required applications

Note: Use a tablet or smartphone with Android version 8 or higher To change ...

2. Introduction

2.1. Manual overview 1. Before use  1.1. Inside the box  1.2. Required applications  2. Intr...

2.2. Buttons description

 

2.3. Status LED modes

2.3.1. 0.5Hz (slow flashing) (1 second icon with flashing lamp/led(ON), 1 second icon with lamp/l...

2.4. FieldBee Toolbox app main screen description

2.4.1. Battery life - shows actual state for battery 2.4.2. Satellites - shows the number o...

3. Installation

3.1. L2 Receiver  3.1.1. Mount L2 receiver on tractors roof; Notes:  - Use Metal ...

3.2. L2 Base Station (skip if you don’t have Base station)

FieldBee RTK Base Station Your Reliable Assistant in Precision Agriculture The FieldBee RTK Bas...

3.3. Turn on Receiver/Base station

3.3.1. Plug in Power cable to cigarette lighter socket:  - in tractor cabin (for Receiver)  - o...

4. Quick start

4.1. Turn On the Device (see Turn on Receiver/Base station)  Note: By default the Rece...

5. Typical scenarios

5.1. Service mode  Note: Service mode should be used if you have no possibility to cre...

5.2. L2 receiver (Standalone)

5.2.1. Install receiver (see Installation -> L2 Receiver)  5.2.2. Go to Quick start and complete...

5.3. Receiver with NTRIP provider

5.3.1. Register with local NTRIP provider  NTRIP provider is an organisation that offers paid or...

5.4. FieldBee L2 Base Station with L2 receiver

5.4.1. Find proper place for the Base station: with a flat surface, above ground and with open sk...

6. Parameters

In this section you will find descriptions of all available parameters and how they can be change...

6.2. WiFi

Important! WiFi has to be only 2,4 GHz; 6.2.1. Go to Quick start and complet...

6.3. Correction mode

6.3.1. Go to Quick start and complete all steps  6.3.2. Open Correction mode parameters    T...

6.4. Base station modes (UBX) For Base station only

6.4.1. Go to Quick start and complete all steps for your Base station  6.4.2. Open UBX parameter...

6.5. Base (for Receiver only)

6.5.1. Go to Quick start and complete all steps  6.5.2. Open Base parameters  6.5.3. Select...

7. Firmware upgrade

7.1. Firmware upgrade  Note: Your tablet/phone has to be connected to Internet (not Fi...

8. FAQ

8.1. Why I can not see “+ FieldBEE Network found” message?Be sure that you gave the permission fo...

9. Specifications

BENEFITS  ● Concurrent reception of GPS, GLONASS, Galileo, and BeiDou;  ● Multi-band RTK with f...

10. Support contacts

If you have any issues with your L2 receiver or base station, please contact our support: Email...